1. The main functions of the automatic mask machine:
The equipment production line is mainly composed of a main body machine, a turning conveyor line and two ear strap welding machines. After the body machine outputs the mask body, the body sheet of the mask will be transferred to the turning mechanism through the conveyor belt structure. Turn the mask plate over to the conveyor belt which is connected to the ear belt machine through the turning machine, and then transfer the mask sheet to the front mask plate of the ear belt machine through the conveyor belt, then press the cylinder to place it, and put the mask sheet with the ear belt machine It is welded as a whole to complete the production of the outer ear mask product.
Our products also include a Fish Type Mask Machine, which is a fully automatic machine for the production of folded mask bodies; and a Flat Mask Making Machine, which connects a mask body machine with a shunt machine, and then passes through the shunt machine and ear straps. The welding machine is connected; there is also a Folding Mask Making Machine, also known as a C-type mask machine, which is a fully automatic machine for the production of folding mask bodies; there is also a Cup Mask Making Machine, also known as a slicer, which mainly uses ultrasonic cutting and automatic welding. The principle of edge sealing is to complete the special-shaped cutting and welding of slices; there are also Medical Making Machine, which refer to the general name of health institutions engaged in disease diagnosis and treatment activities established according to legal procedures. If you want to know more, welcome to consult us, we will serve you wholeheartedly!
Second, the main features of the automatic mask machine:
1. The raw materials are automatically unfolded, automatically conveyed, and the ear wire welding is fully automatic, and the output is high.
2. Computer PLC programming control, good running stability and low failure rate.
3. Automatic tension control to ensure balanced feeding force.
4. Optical fiber sensors detect raw materials to avoid waste due to insufficient materials.
5. The whole machine adopts aluminum alloy structure, which is beautiful and firm, and does not rust.
Third, the maintenance method of the automatic mask machine:
1. Appearance: Masks need to be worn on our faces, even in the operating room. Therefore, the production of masks requires timely cleaning of the mask machine. At the end of each day, staff should be scheduled to clean the work surfaces of the equipment and the boards that hold the masks after the power is turned off. Note that water or oil cannot be used, other non-toxic and volatile cleaning fluids such as alcohol can be used.
2. Transmission system: The transmission system includes motors, gears, reducers, sprockets, chains, conveyor belts and other components. We need to check whether there is dust on the outer surface of the motor that affects the heat dissipation, whether the gears and sprockets are oiled, and whether there are accessories. Is the chain tight enough? Is there a foreign body? Are the connecting screws between the transmission parts loose? Is the lubricating oil of the reducer sufficient? Typically, the oil needs to be changed every 1000 to 1500 hours.
3. Electrical system: Check whether the circuit connector of the equipment is loose, and whether the main power cable, branch signal cable, etc. are worn? Is the electrical equipment loose? Whether the inside of the distribution box is clean and dry, and whether the exhaust fan is working properly, etc.
4. Ultrasonic system: Check whether the ultrasonic system is clean, especially the ultrasonic electric box, transducer, welding head (magnification) must be kept dry, and the connecting wire must be firm. It is also necessary to check the wear degree of the ultrasonic welding head from time to time. Pay attention to the changing range of the voltmeter and ammeter pointers on the ultrasonic electric box.
